How do I activate different types of gps tracking devices for vehicles?

When purchasing gps tracking devices for vehicles, the first and most important thing is to activate the device. Here's how to activate gps tracking devices for vehicles for the first time.

Determine whether the item is wired or installation-free

First of all, the car is clear to buy wiring money or free of installation of the locator. Wiring type positioner needs to connect the vehicle's power supply to work properly; The installation-free, usually fully charged can be used, the use of time depends on the size of the battery. This is usually at the beginning of the purchase customer service will inform.

Method of activation

There is basically no difference in the activation of these two kinds of positioner, the only difference is that the installation of the positioner embedded card, do not need to buy their own extra card. The specific way of activation is:

1. Install a SIM card on the locator; (It is best to buy the matching card sold by the formal business);

2. Connect the power cord (the one without installation should be fully charged) to ensure that the positioner can be turned on normally;

3. Drive the car equipped with the locator out for a normal period of time, and the device will activate and enter the working state.

Operation precautions

In addition, it is necessary to remind you that the power-on operation of the locator should pay attention to:

If it is installed wiring positioner, need to find the positive and negative poles of the car power supply, positive pole in these places can be found: in the box, near the car key switch, or can also be directly connected to the battery. The negative pole is relatively easy to find, the body of the place where the iron.

It is also important to note that it is best to connect the constant electricity, the light side of the locator should face the sky, and the side of the sky should not be close to the metal object blocking the internal GPS antenna, so as not to prevent it from receiving signals.

The above operation is best for the owner to understand a little circuit knowledge, otherwise it is recommended to directly find the manufacturer's technical personnel installation. Sward supports cars to be driven to the location of the manufacturer, the staff to help install free of charge.

It is much simpler to install without installation. As long as the charging cable of the locator is connected, it can be charged after being plugged in. After being fully charged, it is good to observe the charging indicator of the locator. It's either changing color or it's not blinking.

The working Principle of the GPS

3 Best GPS tracking device recommend to you manufactured by Eelink

Which car gps tracking system manufacturer is good? The key to look at these elements!

What are the complete steps to install a car gps tracking system?

What problems may occur during the use of gps tracking system for cars?